Skip to main content

Documentation Index

Fetch the complete documentation index at: https://docs.futurex.com/llms.txt

Use this file to discover all available pages before exploring further.

Perform the following steps to configure KMIP in TrueNAS:
1
Log in to the TrueNAS web interface.
2
Go to System > KMIP to complete the configuration.
3
Enter the CryptoHub hostname or IP address and the default KMIP connection port, 5696 (refer to info.txt for this information). Select the Certificate and Certificate Authority imported in the previous section. To confirm that the certificates are configured properly, select the Validate Connection checkbox and select [ Save ].
4
After the certificate chain is verified successfully, choose the encryption values, SED passwords, or ZFS data pool encryption keys to move to the CryptoHub by using KMIP. Set Enabled to begin the transfer process immediately after selecting [ Save ].
5
Refreshing the KMIP page shows the current KMIP Key Status.To cancel a pending key synchronization, set Force Clear and select [ Save ].