Skip to main content

Documentation Index

Fetch the complete documentation index at: https://docs.futurex.com/llms.txt

Use this file to discover all available pages before exploring further.

This section covers the general KMES configurations that enable Bitwarden to integrate with the KMES and describes the necessary steps to configure TLS communication between the KMES and the Bitwarden instance.

​
Configure the general KMES Series 3 settings

Perform the following tasks to complete the general KMES Series 3 configuration:
  1. Create a role and identity for Bitwarden.
  2. Enable Host API commands.

​
Create a role and identity

Perform the following steps to create a new role and identity for Bitwarden with the required permissions on the KMES Series 3:
A later section shows you how to configure the name of this identity in the Futurex PKCS #11 configuration file.
1
Log in to the KMES Series 3 application interface with the default Admin identities.
2
Go to Identity Management > Roles, and select [ Add ].
3
In the Role Editor window, specify a name for the role and set the number of logins required to 1.
4
Go to the Advanced tab and allow authentication to the Host API port only. Leave all other fields set to the default values.
5
Go to the Permissions tab and select the following permissions:
PermissionSub-permission
Certificate AuthorityAdd, Delete, Export, Export Private Key, Modify, Upload
Cryptographic OperationsSign, Verify, Encrypt, Decrypt, Wrap, Unwrap
KeysAdd, Delete, Export, Modify
6
Select [ OK ] to finish creating the role.
7
Go to Identity Management> Identities, right-click anywhere in the window, and select Add> Client Application.
8
On the Info tab of the Identity Editor window, select Application for the storage location, and specify a name for the identity.
9
On the Assigned Roles tab, select the role you created.
10
On the Authentication tab, configure the password for the identity.
11
Leave all other fields set to the default values, and select [ OK ] to finish creating the identity.

​
Enable the Host API commands

Because the Futurex PKCS #11 library connects to the Host API port on the KMES, you must define which Host API commands (required for the Bitwarden operation) to enable for the FXPKCS11 library. To set the enabled commands, complete the following steps:
1
Log in to the KMES Series 3 application interface with the default Admin identities.
2
Go to Administration > Configuration > Host API Options, and enable all Host API commands.
3
Select [ Save ] to finish.

​
Configure TLS communication

Perform the following tasks to configure TLS communications between the KMES Series 3 and Bitwarden:
  1. Create a CA.
  2. Create a CSR for the connection pair.
  3. Sign the CSR.
  4. Export the Root CA certificate.
  5. Export the signed System/Host API certificate.
  6. Load the exported certificates to the connection pair.
  7. Issue a client certificate for Bitwarden.
  8. Export the Bitwarden certificate as a PKCS #12 file.

​
Create a CA

Perform the following steps to create a Certificate Authority (CA):
1
Log in to the KMES Series 3 application interface with the default Admin identities.
2
Go to PKI > Certificate Authorities, and select [ Add CA ] at the bottom of the page.
3
In the Certificate Authority window, enter a name for the certificate container, leave all other fields set to the default values, and select [ OK ].
The certificate container now displays in the Certificate Authorities menu.
4
Right-click the certificate container and select Add Certificate > New Certificate.
5
On the Subject DN tab, set a Common Name for the certificate, such as System TLS CA Root.
6
On the Basic Info tab, leave all fields set to the default values.
7
On the V3 Extensions tab, select the Certificate Authority profile, then select [ OK ].
The root CA certificate now displays under the previously created Certificate Container.

​
Generate a CSR

Perform the following steps to generate a CSR for the System/Host API connection pair:
1
Go to Administration> Configuration> Network Options.
2
In the Network Options window, go to the TLS/SSL Settings tab.
3
Under the System/Host API connection pair, uncheck the Use Futurex certificates checkbox, and select [ Edit ] next to PKI Keys in the User Certificates section.
4
In the Application Public Keys window, select [ Generate ].
5
When warned that SSL will not be functional until new certificates are imported, select [ Yes ] to continue.
6
In the PKI Parameters window, leave the fields set to the default values and select [ OK ].
The PKI Key pair now shows as loaded in the Application Public Keys window.
7
Select [ Request ].
8
On the Subject DN tab, set a Common Name for the certificate, such as KMES.
9
On the V3 Extensions tab, select the TLS Server Certificate profile.
10
On the PKCS #10 Info tab, select a save location for the CSR, and select [ OK ].
11
When notified that the certificate signing request was successfully written to the file location that was selected, select [ OK ].
12
Select [ OK ] again to save the Application Public Keys settings.
In the main Network Options window, Loaded now displays next to PKI Keys for the System/Host API connection pair.

​
Sign the System/Host API CSR

Perform the following steps to sign the System/Host API CSR:
1
Go to PKI> Certificate Authorities.
2
Right-click the root CA certificate you created, and select Add Certificate> From Request.
3
In the file browser, find and select the CSR that you generated for the System/Host API connection pair.
4
After it loads, you don’t need to modify any settings for the certificate. Select [ OK ].
The signed System/Host API certificate now displays under the root CA certificate on the Certificate Authorities page.

​
Export the certificate

Perform the following steps to export the Root CA certificate:
1
Go to PKI> Certificate Authorities.
2
Right-click the System TLS CA Root certificate, and select Export> Certificate(s).
3
In the Export Certificate window, change the encoding to PEM, and select [ Browse ].
4
In the file browser, go to the location where you want to save the signed System/Host API certificate. Specify tls_ca.pem as the name for the file, and select [ Open ].
5
Select [ OK ].
A message box notifies you that the PEM file was successfully written to the location that you specified.

​
Export the signed System/Host API certificate

Perform the following steps to export the signed System/Host API certificate:
1
Go to PKI> Certificate Authorities.
2
Right-click the KMES certificate, and select Export> Certificate(s).
3
In the Export Certificate window, change the encoding to PEM, and select [ Browse ].
4
In the file browser, go to the location where you want to save the signed System/Host API certificate. Specify tls_kmes.pem as the name for the file, and select [ Open ].
5
Select [ OK ].
A message box notifies you that the PEM file was successfully written to the location that you specified.

​
Load the exported certificates

Perform the following steps to load the exported certificates into the System/Host API connection pair:
1
Go to Administration> Configuration> Network Options.
2
In the Network Options window, go to the TLS/SSL Settings tab.
3
Select [ Edit ] next to Certificates in the User Certificates section.
4
Right-click the System/Host API SSL CA X.509 certificate container and select [ Import ].
5
Select [ Add ] at the bottom of the Import Certificates dialog.
6
In the file browser, select both the root CA certificate and the signed System/Host API certificate and select [ Open ].
7
Select [ OK ] to save the changes.
In the Network Options window, the System/Host API connection pair now shows Signed loaded next to Certificates in the User Certificates section.
8
Select [ OK ] to save and exit the Network Options dialog.

​
Issue a client certificate

Perform the following steps to issue a client certificate for Bitwarden:
1
Go to PKI> Certificate Authorities.
2
Right-click the System TLS CA Root certificate and select Add Certificate> New Certificate.
3
On the Subject DN tab, set a Common Name for the certificate, such as Bitwarden.
4
Leave all fields on the Basic Info tab set to the default values.
5
On the V3 Extensions tab, select the TLS Client Certificate profile, and select [ OK ].
The Bitwarden certificate now displays under the System TLS CA Root certificate.A later section shows you how to configure this client certificate in the Futurex PKCS #11 configuration file.

​
Export the certificate

Perform the following steps to export the Bitwarden certificate as a PKCS #12 file:
To perform the following steps, go to Configuration > Options and enable the Allow export of certificates using passwords option.
1
Go to PKI> Certificate Authorities.
2
Right-click the Bitwarden certificate and select Export> PKCS12.
3
Select the Export Selected option, specify a unique name for the export file, and select [ Next ].
4
Enter a file password of your choosing and select [ Next ].
5
Select [ Finish ] to initiate the export.
6
Move both the Bitwarden certificate and the Root CA certificate exported in a previous section to the computer that runs the Bitwarden instance.A later section shows how to configure and use them for TLS communication with the KMES Series 3.